Tested and approved by hundreds of specialists, Calculitus is a Pneumatic Ballistic Intracorporeal Lithotripter which effectively fragments, via endoscope, stones located in the urethra, kidney and bladder, no matter their composition, type or size.
Designed with state-of-the-art technology, CALCULITUS is:
- Minimally invasive
- User-friendly
- Effective
- Your guarantee of safe procedures every day
- Not only is CALCULITUS light (7.28 lb), but also the only one which comes in a portable purpose-designed case.
Components
- Main unit
- 8 probes
- Case for transport
- Pressure regulator
- Transducer
- Waterproof pneumatic footswitch
Other Characteristics
- The best cost-benefit relation in lithotripsy
- Appropriate for all the urinary system
- No damage to tissues or the optics
- No generation of heat
- Short procedure time
- User-friendly and easy to maintain
- Light and easy-to-handle transducer
- Interchangeable long-duration probes
- Display showing the number of transducer pulses and pressure level
- Pulse frequency on 2 levels
- Simple or continuous pulse types
- Compatible with any endoscopic equipment
Technical Information
| Energy | |
| Principle: | Ballistic energy |
| Energy source: | Compressed air |
| Compressed air pressure requirement: | 2 - 4 Bar |
| OPERATION: | |
| Operating modes: | Single or continuous pulse |
| Pulse rate selection: | Low or high |
| Compressed air pressure selection: | Continuous adjustment |
| Footswitch: | Waterproof, pneumatic |
| MAIN SUPPLY: | |
| Power requirement: | 110/220 V / 60Hz (adjusted manually) |
| Total power: | 5 VA |
| Electrical isolation: | Class B isolation transformer |
| Grounding: | Less than 4 ohm |
| DIMENSIONS: | |
| Width: | 307 mm (12.1") |
| Length: | 265 mm (10.4") |
| Height: | 117 mm (4.6") |
| Weight: | 3.3 kg (7.28 lb) |
| COMPATIBLE ENDOSCOPES: | Any for urology |
| ENVIRONMENTAL CONDITIONS FOR OPERATION: | |
| Operating temperature: | +5ºC to +35ºC (41ºF to 95ºF) |
| Relative humidity: | 10% to 90% |
| Atmospheric pressure: | 525 to 800 mm/Hg |
| SAFETY STANDARDS: | IEC 601.1, class 1, type B |
Due to continued product innovation, specifications may change without notice.
PROBES:
| DIAMETER | LENGTH |
| 0.8 mm (2.4 Fr) | 624 mm (24.6") |
| 1.0 mm (3.0 Fr) | 624 mm (24.6") |
| 1.2 mm (3.6 Fr) | 624 mm (24.6") |
| 1.5 mm (4.5 Fr) | 624 mm (24.6") |
| 2.0 mm* (6.0 Fr) | 414 mm (16.3") |
*Used for percutaneous procedures / All probe lengths can be adjusted upon request
0128 - Maleta para transporte
1005 - Transdutor autoclavável
0110 - Pistão Bala
122 - Tampão de Esterilização
97 - Mangueira de Silicone do Transdutor
1003 - Mangueira de Alimentação de Ar Comprimido
1004 - Mangueira de Alimentação de Ar Comprimido 5m
1001 - Pedal Pneumático
0093 - Engate da Mangueira de Ar Comprimido
0094 - Engate do Transdutor
Orings
1002 - Manual de Operação
0049 - Cabo de Alimentação
0048 - Fusivel 500ma 20 agt
0098 - Regulador de Pressão Externo
1007 - Kit Transdutor Autoclavável Completo
0565 - Tampa para Sonda Autoclavável
0570 - Tampa de Esterilização Autoclavável
0571 - Sonda 0,8 mm 2,4 French Autoclavável
0572 - Sonda 1,0 mm 3,0 French Autoclavável
0573 - Sonda 1,2 mm 3,6 French Autoclavável
0574 - Sonda 1,5 mm 4,5 French Autoclavável
0575 - Sonda percutânea 2,0 mm 6,0 French Autoclavável
1006 - Kit Descartáveis Transdutor Autoclavável para 100 Autoclavagens
0112 - Transdutor Descontinuado - Tampa para Sonda
0113 - Transdutor Descontinuado - Tampa de Esterilização
0111 - Transdutor Descontinuado - Tampa do Bastão do Transdutor
0096 - Transdutor Descontinuado - Mola de Silicone
1008 - Transdutor Descontinuado - Transdutor Completo
0553 - Transdutor Descontinuado - Sonda 0,8 mm 2,4 French
0554 - Transdutor Descontinuado - Sonda 1,0 mm 3,0 French
0555 - Transdutor Descontinuado - Sonda 1,2 mm 3,6 French
0556 - Transdutor Descontinuado - Sonda 1,5 mm 4,5 French
0557 - Transdutor Descontinuado - Sonda Percutânea 2,0 mm 6,0 French
